Easy to install & solid structure. The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving.
The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes. Upgraded dual compression spot coupling technology. Ultra-fine laser focus area is reduced to 0.08x0.06mm, high-density laser can easily cut 20mm thick wood, 15mm thick acrylic; Can directly engrave mirror stainless steel metal, ceramics, glass, and engraving & cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO2 laser engraving machine. No need to adjust the focus before engraving; The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 220x250mm large area engraving interval can meet your various engraving needs. The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF. Uses an integrated screw rod which makes the movement of the laser more precise and the coupling more durable.
Support offline engraving; In the event of an unexpected situation, stop the machine at any time to make the engraving safer. The laser sintering temperature is up to 1200? Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective. Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate. Cutting Objects: Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge.Wave Length: 445 ± 5nm. Focusing method: fixed focus laser, no need to focus. Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection/TF card. Certification: CE FCC RoHS FDA PSE. Package Size: 49 x 27.5 x 13.5cm/19.2 x 10.8 x 5.3in.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine.
Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. 1 × Screw parts (Step2/3/4/5) 1 × Dust-free cloth 1 × Tool kit 1 × Fixed focus film 3 × Acrylic sheet 3 × Wood chips 1 × Card reader 5× Cable tie 1 × Accessories package 1 × Display assembly 1 × Display cable 1 × Power adapter 1 × Power cable 1 × Data line 1 × Metal cutting pad 1 × Manual 1 × Laser assembly 1 × X axis assembly 1 × Y axis assembly 2 × Support tripod 4 × Assembly block 1 × Desiccant. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".
The seller is "fly-buy_onlineshop" and is located in this country: CN. This item can be shipped to United States, all countries in Europe, Mexico, Japan, Canada, Australia.