LATITOOL F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, with super cutting penetration and precision, and the engraving & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent. LATITOOL F50 has the fastest focus design. The F50 laser combines a fixed focal length lens with a sliding design. You just need to slide the laser and tighten the screw to finish focusing.
It can be done easily even if you are a novice. The all-metal structural design makes the machine extremely sturdy, improves the engraving accuracy, and the structural frame is very durable and keeps it open for upgrades.During use, you can keep the frame and replace it with other new lasers. Or replace the longer Y-axis profile to expand the engraving area. The laser filter cover can filter 98% of the ultraviolet rays entering the eyes. You and those around you can watch the laser engraving without goggles, while preventing animals from catching the laser spot. And the laser protection cover has a magnetic suction function, and the installation is very simple. The 4 support feet of the machine can be adjusted in height, and are marked with precise scale lines to ensure that the machine remains level, which is convenient for you to engrave tall objects, and can also be used with rollers. The machine adopts an integrated lead screw instead of a combined coupling. The stepping motor and the lead screw are integrated, which makes the movement of the laser more accurate and the coupling more durable. This machine is equipped with a very convenient power switch, which is not found in other models, which is convenient for you to start or end work at any time. There are precision scale lines on the X axis and Y axis, which is convenient for you to measure the length quickly. The 410x410mm large-area engraving range can meet your various engraving needs. The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and the engraving file format supports JPG, PNG, DXF, TIF, BMP, PDF, NC, SVG, AI, etc. Engraving: wood, zigzag, cardboard, plastic, iron, PCB, aluminum oxide, glass, non-reflective electroplating and lacquer metal, black-painted artwork; Cutting: cardboard, non-woven fabric, thin film, some thin plastic sheets. Fixed focus laser, no focus adjustment. Yes, there is a protective cover on the laser to protect the eyes and prevent pets from scratching the laser spot. LightBurn support Win XP / Win 7 / Win 8 / XP / Win 10/Mac.
JPG, PNG, DXF, TIF, BMP, PDF, NC, SVG, AI and so on. Metal rack with reserved holes for fixing. International common standard power supply Input: 100-240V AC, 50/60HZ Output: 12V 3A. CE FCC FDA RoHs UKCA IEC60825. Step 1Step 4 Screw Kit.For detailed machine usage instructions, please refer to the parameter settings in the manual. When operating the laser engraving machine, please install the laser protective cover. If not installed, goggles will be required. Do not touch the laser transmitter with your hands, otherwise you may burn your hands. Please avoid strong impact on the machine. Children under 14 years old are not allowed to use this product, and children over 14 years old need adult supervision. The laser engraving machine cannot directly act on any specular reflection object, otherwise it may cause injury to the operator or burn the laser. If you have any question, you can send message to us, we will try our best effort to solve it.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "cctv-bar" and is located in this country: CN. This item can be shipped to United States, Canada, Australia.