Brand Name : ANNOY TOOLS Origin : CN(Origin) Certification : ce Working Area : 4540cm Laser Power : 80W Laser type : 2 diodes Beam : 2LD-FAC+C-LENS Conttroller : 32 bit System : Wins/mac OS/ Linux Software : LaserGRBL/Lightburn. Model: 450400cm Laser Engraver Machine.Install 80W 40mm laser : 450380mm working area. 32 bits motherboard with 32 Bits MCU It can process 32 instructions at a time, greatly increasing the file processing speed. Laser power range could be S0 - S1000. Larger power adjustment range, freely adjust according to your needs If you want the ax power, just set minS999, max1000. (If do not consider the laser carving result, the velocity of movement could be as high as 60000mm/min).
Active Position Protection: It will be turned on with a strong alarm sound in these three cases. Machine was moved during working. Power=1the laser turn on 5S still not start working. Single motor setting, one drive module corresponds to one motor, which can increase the current while reducing the weight of the machine body and improve the running speed of the machine.
Limit switch: XY axis limit switch. Protect the normal operation of the machine. Exposure Duration Detection and Limitation.
If laser engraver is under control without anybody notice, it will be turned on to make the machine stop working. X-axis adopts eccentric nut design. This machine uses eccentric nuts to avoid X-axis shaking, making the machine more stable.
This machine adds a slider on the X axis to install the laser and has better heat dissipation, which is helpful for the adjustable focus laser to adjust the focus, and it is easier to replace the laser. Adding a transparent acrylic module allows the machine to install lasers of any size, and the combination with a pair of sliding modules makes the whole structure more convenient. Make the machine cable clean and not entangled, more beautiful and convenient. If connect offline and USB together, the machine will choose USB; only connect offline separate, the machine will work offline. Reduce assembly time and be more friendly to newcomers.Laser Wavelength: 445nm (blue viole). Drive mode: External ACC constant current drive. Cooling Method: Forced air cooling.
Shell Material: Aluminum, Surface Anodized. The item "DIY 80W Laser Engraving Cutting Machine Wood Router with 32-bit Motherboard" is in sale since Friday, November 19, 2021.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "lunyee" and is located in .
This item can be shipped worldwide.