The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes. Upgraded dual coupling technology: ultra-fine area is reduced to 0.080.06mm, high-density can easily cut 20mm wood, 15mm thick acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving & cutting speed is 40% higher than model, which can be comparable to the effect of the 150W 2 engraving machine. Upgraded fixed- : no need to adjust the before engraving;The focal area of the new is only 1/3 of the area of other ordinary lasers, new combine engraving and high energy cutting at the same.The of the fixed- is more stable than the zoom. Precise scale lines : There are precise scale lines on the X- and Y- to facilitate quick length measurement.
410x400mm large area engraving interval can meet your various engraving needs. Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. More function: uses an integrated screw rod which makes the movement of the more precise and the coupling more. Support offline engraving; In the event of an unexpected situation, stop the machine at any to make the engraving safer.
The sintering is up to 1200? Specification: Model: ATOMSTACK S10 PRO Print Size: Recommend Print Size 410400mm Carving Objects:Wood, bamboo, cardboard,, leather, board, oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin board, sponge; : 50W output : 10-11W Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed , no need to protective cover: the user's eyes and pets from grabbing the. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection. Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 3A Package Size: 59.53513cm/ 2313.85.1in.
Package Weight: 5.77kg/12.7. When operating the engraving machine, please install the protective cover. If it is not installed, you need to wear.Please do not the emitter with your hand, or it may burn your hand. Please strong impact on the machine. Under 14 are not allowed to use this product and over 14 need supervision. The engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the. Packing List: 1 x Tool Kit 4 x Foot Pad Foam 1 x Film 3 x Acrylic Sheet 3 x Wood Chips 10 x Wire Tie 1 x Desiccant 1 x Brush 1 x Cloth 1 x 1 x TF 1 x 1 x Instruction 1 x Data Line 1 x Screen 1 x High-Definition Interface Cable 1 x Module 1 x Cutting Pad 1 x X Assembly 1 x Y Left Profile 1 x Y Right Profile 1 x Profile On The Base 1 x Under The Base Profile 3 x Foot Bracket. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "flueonsky" and is located in this country: CN. This item can be shipped to United States, Canada, Japan.