The Master Laser 2 - 7W is good for image engraving. The 2-15W laser master is the most economical, available for both engraving and cutting. The Laser Master 2-20W is higher power and supports faster engraving and cutting.
Specialized motherboard with STM32 MCU. It can preprocess 32 instructions, support rate as high as 921600, more powerful! Most advanced 32-bit laser firmware engraver. Ortur laser master firmware, smarter, faster, higher accuracy and easier to use. Laser power range can be S0 - S1000, compared to 8 bits desktop laser engraver, which only has S0 - S255, Ortur laser master can control laser beam more accurately, can even use high power laser unit to "draw" an image on paper, Because the 8 bits high power laser engravers can not do.
Speed engraving can be as high as 3000 MM / Min. (If you do not consider the laser carving result, the speed of movement can be as high as 1000mm / second).
Has a G-sensor on the mother, if the machine detects unauthorized movement, the laser beam will stop. If your computer system is stopped or USB cable disconnected, led it to laser etch stops moving, the laser beam stops, to prevent fire. Exposure duration identification and restriction. If the laser engraver is under control, but people forget operate and maintain the laser beam work , Additional safety will be disconnected in case the engine stops moving, to prevent fire.
LaserGRBL is the most popular carving software in the world, can import different image format, you can edit in Photoshop, Inkscape, CAD, etc. And then connect engraver using LaserGRBL laser for engraving And cutting.Com) supports Windows, Mac OS, Linux. It is the most popular paid carving software in the world, very easy to use. This laser engraver supports PWM mode. Pre-assembled parts, only need 10 - 20 minutes to install the machine.
Aluminum frame profile + built-in, solid structure, smooth operation, attractive appearance Mechanical shaft synchronization structure, prevent synchronization outside on two Y rails, during full engraving speed. Motherboard: 32 bits Motherboard with STM32 MCU Firmware: Ortur Laser Master Firmware Computer of top computer: Windows (working with LaserGRBL), MAC OS and linux (working with LightBurn) Power of laser engraver: 36W, 12V 3A Power power of laser module: 7W, 15W, 20W Wavelength: 445 ± 5nm Focus variable: yes Default focal length: 55MM for 15W & 20W laser module; 58MM for 7W laser module Input format: NC, BMP, JPG, PNG, DXF, etc.Carving area: X: 400MM x Y: 430MM Carving speed: 3000 MM / Min and less Image size: No limit (the pixel accuracy can be adjusted freely, and the default is 300 pixels per inch, it is about 0.81um pixel Accuracy). Please wear glasses and activate the laser engraver. Wear safety goggles to prevent blindness.
Please do not touch the emitting laser with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting an object, which may cause injury to the operator or burn the laser.This product is not recommended for industrial cutting due to its high engraving speed. Product weight: 2.8000 kg Package Weight: 3.4000 kg Product size (L x width x H): 57.00x55.00x17.52 cm / 22.44x21.65x6.9 cm Package size (L x width x H): 58.00x20.00x11. 00 cm / 22.83x7.87x4.33 cm. Package Contents: 1 x Laser Engraving Machine. The item "Laser Engraving Cutting Machine With 32-Bit Motherboard 7w 15w 20w Fast Speeds" is in sale since Tuesday, October 6, 2020. This item is in the category "Crafts\Home Arts & Crafts\Woodworking\Wood Carving Hand Tools". The seller is "e_and_e_yato112" and is located in HK. This item can be shipped worldwide.